Inconel 800 / 800H / 800HT Nickel Alloy Seamless Tube

Inconel 800 / 800H / 800HT Nickel Alloy Seamless Tube

Material Grade: Alloy 800 / 800H / 800HT, Alloy 625/UNS N06625,Alloy 600/UNS N06600,Alloy 601/UNS N06601, Alloy 800/UNS N08800, Alloy 825/UNS N08825, Alloy 400/UNS N04400; etc
Outer Diameter:3.18mm-101.60mm(10.30mm-406.40mm)
Wall Thickness: 0.50mm-20.00mm(1.24mm-40.49mm)
Length: Normally fixed length 6m, can as per customer’s requirement
Standard: ASTM B163; ASTM B167; ASTM B444; ASTM B622 ect
Process Method: Cold Drawn or Cold Rolled

Application: Chemical and petrochemical process piping, heat exchangers, furnace components, carburizing equipment, heating-element sheathing, and nuclear power steam-generator tubing.

STANDARD	WERKSTOFF NR.	UNS	JIS	AFNOR	BS	GOST	EN	OR
Incoloy 800	1.4876	N08800	NCF 800	Z8NC32-21	NA 15	ЭИ670	X10NiCrAlTi32-20	XH32T
Incoloy 800H	1.4958 / 1.4876	N08810	NCF 800H	Z8NC33-21	NA 15(H)	ЭИ670	X5NiCrAlTi31-20	XH32T
Incoloy 800HT	1.4859 / 1.4876	N08811	NCF 800HT	-	NA 15(HT)	ЭИ670	X8NiCrAlTi32-21	XH32T

Chemical Composition :

Incoloy	800	800H	800HT
Ni	30-35	30-35	30-35
Fe	39.5 min	39.5 min	39.5 min
Cr	19-23	19-23	19-23
Cu	0.75 max	0.75 max	0.75 max
Ti	0.15-0.60	0.15-0.60	0.25-0.60
Al	0.15-0.60	0.15-0.60	0.85-1.20
C	0.1 max	0.05-0.1	0.06-0.1
Mn	1.5 max	1.5 max	1.5 max
S	0.015 max	0.015 max	0.015 max
Si	1.0 max	1.0 max	1.0 max

Mechanical & Physical Properties :

Density	7.94 g/cm3
Melting Point	1385 °C (2525 °F)
Tensile Strength	Psi – 75,000 , MPa – 520
Yield Strength (0.2%Offset)	Psi – 30,000 , MPa –205
Elongation	30 %