หน้าแปลนสแตนเลส 253MA, S31254, 904L, F51, F53, F55

In metallurgy, stainless steel also called as inox steel or inoxidizable steel. It is a steel material alloyed with high content of chromium and nickel, where

Minimum Cr at 10.5%
Minimum Ni at 8%
Maximum Carbon at 1.5%
As we know, stainless steel flange is impressed by it's great corrosion resistance, which because of the elements of Chromium, and as Cr increased, better resistant performances will be gained.

On the other hand, additions of Molybdenum will increase corrosion resistance in reducing acids and against pitting attack in chloride solutions. So there are different grades of stainless steel with varying Cr and Mo compositions to suit the environment with required to be alloyed.

Advantages:
Resistant to corrosion and staining
Low maintenance
Bright familiar luster
Steel Strength

 

ชื่อสินค้า: หน้าแปลนสแตนเลส
ประเภทSlip On, Weld Neck, Socket Weld, Plate, Blind, Threaded, Reducing, Lap Joint, Spectacle เป็นต้น
เกรดF304, F304L, F309S, F310S, F316, F316L, F316Ti, F317, F317L, F321, F347, S30815 / 253MA, S31254 / 254SMO, N08904 / 904L, F51, F53, F55 เป็นต้น
มาตรฐานASTM A182 / 182M, ASME B16.5, ASTM A240, ASME B16.47-A, ASME B16.47-B, JIS B2220 เป็นต้น
ขนาด1/2"- 48"
ความดัน150-2500 ปอนด์
เผชิญหน้ายก (RF), หน้าเรียบ / เต็มหน้า (FF), แหวนข้อต่อใบหน้า (RTJ)
การบรรจุลังไม้ / กล่องไม้อัดหรือตามคำขอของลูกค้า
ใบสมัครการขนส่งน้ำมันและก๊าซ LNG ปิโตรเคมีพลังงานนิวเคลียร์การต่อเรือเยื่อและกระดาษบำบัดน้ำเสียการก่อสร้างยาอาหารการตกแต่งและอื่น ๆ
มาตรฐานอื่น ๆAWWA C207, BS4504, SABS 1123, TABLE D, GOST 12820 / 1-80, AS 2129 เป็นต้น

 

ประเภทของครีบ:

หน้าแปลนตาบอดสแตนเลสสแตนเลสลดครีบแหวนสแตนเลสชนิดหน้าแปลน
หน้าแปลนสเตนเลสสตีลหน้าแปลนคอเชื่อมสแตนเลสหน้าแปลนสเตนเลสสตีลสูง
หน้าแปลนสแตนเลสสตีลหน้าแปลนสแตนเลสตักหน้าแปลนคอเชื่อมยาวสแตนเลส
สลิปออนสแตนเลสสตีลซ็อกเก็ตสแตนเลสเชื่อมหน้าแปลนหน้าแปลนสแตนเลสสตีล

 

Many different types of stainless steel flanges can be incorporated into a piping system. Stainless steel flanges are highly resistant to rust, are much stronger and can out perform carbon steel flanges and provide much more corrosion resistance than your aluminum or steel flanges.

ASME (American Society of Mechanical Engineers) flanges are engineered to meet certain standards. These standards are specified by the ASME and by the American National Standards Institute (ANSI). There are certain specifications in all flanges, each depending on the certain type of flange. This similarity ensures consistency with the same types of flanges used and replaced now and in the future.

 

, , , ,