paslanmaz çelik flanşlar 253MA, S31254, 904L, F51, F53, F55

In metallurgy, stainless steel also called as inox steel or inoxidizable steel. It is a steel material alloyed with high content of chromium and nickel, where

Minimum Cr at 10.5%
Minimum Ni at 8%
Maximum Carbon at 1.5%
As we know, stainless steel flange is impressed by it's great corrosion resistance, which because of the elements of Chromium, and as Cr increased, better resistant performances will be gained.

On the other hand, additions of Molybdenum will increase corrosion resistance in reducing acids and against pitting attack in chloride solutions. So there are different grades of stainless steel with varying Cr and Mo compositions to suit the environment with required to be alloyed.

Advantages:
Resistant to corrosion and staining
Low maintenance
Bright familiar luster
Steel Strength

 

Ürün adı: Paslanmaz Çelik Flanş
TürSlip On, Kaynak Boyunlu, Soket Kaynaklı, Plaka, Kör, Dişli, Redüksiyonlu, Bindirmeli Bağlantı, Gözlük vb.
DereceF304, F304L, F309S, F310S, F316, F316L, F316Ti, F317, F317L, F321, F347, S30815 / 253MA, S31254 / 254SMO, N08904 / 904L, F51, F53, F55 vb.
StandartASTM A182 / 182M, ASME B16.5, ASTM A240, ASME B16.47-A, ASME B16.47-B, JIS B2220 vb.
Boyut1/2"- 48"
Basınç150-2500 LBS
BakanYükseltilmiş Yüz (RF), Düz Yüz / Tam Yüz (FF), Halka Eklem Yüz (RTJ)
PaketlemeAhşap kasalar / Kontrplak kutular veya müşterilerin isteğine göre.
UygulamaPetrol ve Gaz taşımacılığı, LNG, petrokimya, nükleer enerji, gemi yapımı, kağıt hamuru ve kağıt, kanalizasyon arıtma, inşaat, ilaç, gıda maddeleri, dekorasyon ve diğerleri.
Diğer StandartlarAWWA C207, BS4504, SABS 1123, TABLE D, GOST 12820 / 1-80, AS 2129 vb.

 

Flanş Tipleri:

Paslanmaz Çelik Kör FlanşlarPaslanmaz Çelik Redüksiyon FlanşlarıPaslanmaz Çelik Halka Tipi Flanşlar
Paslanmaz Çelik Gözlük FlanşlarıPaslanmaz Çelik Kaynak Boyunlu FlanşlarPaslanmaz Çelik Yüksek Göbek Flanşları
Paslanmaz Çelik Dişli FlanşlarPaslanmaz Çelik Bindirmeli FlanşlarPaslanmaz Çelik Uzun Kaynak Boyunlu Flanşlar
Paslanmaz Çelik Geçmeli FlanşlarPaslanmaz Çelik Soket Kaynaklı FlanşlarPaslanmaz Çelik Orifis Flanşları

 

Many different types of stainless steel flanges can be incorporated into a piping system. Stainless steel flanges are highly resistant to rust, are much stronger and can out perform carbon steel flanges and provide much more corrosion resistance than your aluminum or steel flanges.

ASME (American Society of Mechanical Engineers) flanges are engineered to meet certain standards. These standards are specified by the ASME and by the American National Standards Institute (ANSI). There are certain specifications in all flanges, each depending on the certain type of flange. This similarity ensures consistency with the same types of flanges used and replaced now and in the future.

 

, , , ,