Nimonic 75 Round Bar N060750 / 2.4630

Nimonic 75 Round Bar N060750 / 2.4630

 

Nimonic 75 Specification:

GradeNimonic 75 – UNS N06075
SpecificationASTM B348 UNS N06075
StandardASTM, ASME, API, GB, AISI, DIN, EN, SUS, UNS
ASTM B166, ASTM B160, ASTM B164, ASTM B446, ASTM B637, ASTM B408, ASTM B425, ASTM B574, ASTM B335, ASTM B473, ASTM B649
Nimonic 75 Round bar sizeDiameter: 3mm~800mm
Nimonic 75 Angle bar size3mm*20mm*20mm~12mm*100mm*100mm
Nimonic 75 Square bar size4mm*4mm~100mm*100mm
Nimonic 75 Flat bar sizeThickness: 2mm~100mm
Width: 10mm~500mm
Nimonic 75 Hex Bar size2mm~100mm
Nimonic 75 Billet Size1/2″ to 495mm Diameter
Nimonic 75 Rectangles Size33mm x 30mm to 295mm x 1066mm
LENGTHS12 RANDOM LENGTHS AND LONG BARS:15 20 RANDOM LENGTHS
FinishBright, Polish, Bright, Rough Turned, Grinding, Centreless Ground & Black
ToleranceH8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
SurfaceHot Rolled Pickled or Sand Blasting Finished, Cold Drawn, Bright, Polished, Hairline
ConditionCold Drawnd Pulished Cold Drawn Centreless Ground & Polished, Annealed round bar
TechniqueNimonic 75 Hot Rolled, Cold Rolled, Cold Drawn, Forged Round Bar, Rod
FormRound, Rod, Precision Ground Bar, Square, Round Rod, Hollow, Hex (A/F), Triangle, Rectangle, Threaded, T-Bar, Half Round Bar, Flat Bar, Rings, Blocks,  I/H Bar, Angle, Channel Bar, Profiles, Forging Etc.

Our Nimonic 75 conforms to NACE MR0175/ISO 15156:

TypeSIZES (mm)SIZES (Inches)ISO Tolerance
Cold Drawn and Polish3.00 – 75.001/8” – 3.00”h8-h9-h10-h11, ASTM B348
Cold Drawn and Ground10.00 – 75.005/6” – 2.50”h8-h9-h10-h11
Peeled and Polished40.00 – 150.001.50” – 6.00”h11, ASTMA-484 h11-DIN 1013
Peeled and Ground20.00 – 50.003/4″ – 2.00”h9-h10-h11, ASTM B348

NIMONIC 75 Bars Stock List

AlloyProduct formDimension
NIMONIC 75 (80 Ni/20 Cr)Round bar; cold drawn, annealedDia=4.0 mm, Weight=0.106 kg/m
NIMONIC 75 (80 Ni/20 Cr)Round bar; cold drawn, pickled, annealedDia=8.0 mm, Weight=0.42 kg/m
NIMONIC 75 (80 Ni/20 Cr)Round bar; hot finished, ground, annealedDia=16.0 mm, Weight=1.7 kg/m
NIMONIC 75 (80 Ni/20 Cr)Round bar; cold rolled, annealedDia=25.4 mm, Weight=4.2 kg/m
NIMONIC 75 (80 Ni/20 Cr)Round bar; extruded, machining qual, annealedDia=32.0 mm, Weight=7.0 kg/m
NIMONIC 75 (80 Ni/20 Cr)Round bar; extruded, annealedDia=40.0 mm, Weight=10.6 kg/m
NIMONIC 75 (80 Ni/20 Cr)Round bar; extruded, annealed, machinedDia=50.8 mm, Weight=17.75 kg/m
NIMONIC 75 (80 Ni/20 Cr)Round bar; annealedDia=70.0 mm, Weight=32.5 kg/m
NIMONIC 75 (80 Ni/20 Cr)Round bar; annealedDia=76.2 mm, Weight=38.2 kg/m
NIMONIC 75 (80 Ni/20 Cr)Round bar; machining quality, annealedDia=85.0 mm, Weight=46.5 kg/m

Nimonic 75 bar properties:

Nimonic 75 bar mechanical properties

Specific Gravity

8.37 g/cm3

NIMONIC 75 Round, Bright, Hex, Threaded Bar Chemical Composition (Wt %)

NiCrFeCMnSiCuAlTi
Min-19-0.08-0.3--0.2
MaxBa2150.131.00.70.50.30.6

NIMONIC 75 Round Bars Mechanical & Physical Properties

Typical Mechanical Properties in the Solution Treated Condition

0.2% Proof StressTensile StrengthElongationHardness
MPAMPA%HB
24065025<230 (less equal)

NIMONIC 75 Bars Equivalent Grades

  • BS HR5
  • BS HR504
  • UNS N06075
  • DIN 17752
  • ISO 9723
  • W.Nr 2.4630

NIMONIC 75 Round Bar Typical Applications

  • NIMONIC 75 Flat Bar for Components for industrial and aircraft gas turbines
  • NIMONIC 75 Hex Bar for Industrial furnace components
  • NIMONIC 75 Hexagonal Bar for High Temperature fasteners
  • NIMONIC 75 Square Bar for Thermocouple sheathing
  • NIMONIC 75 Hex Rod for Heat treating equipment and fixtures