Tool Steel Flat Bar 1.2713,1.2080,1.2738,1.4021,O1,A8,A1,S7,F1,D7,H21

Tool Steel Flat Bar

We can supply whole tool steel, mould steel and special steel products with competitive price in European Standard(EN/DIN/BS), American Standard(ASTM/ANSI), Japanese Standard(JIS) and other national standard, etc.

Our production of high performance mould steel is achieved through state of the art processing and the exclusive use of top grade raw materials allowing to produce large-size moulds and tools.

Our Main Product Range:

Tool Steel: Carbon Tool Steel, Alloy Tool Steel, High-speed Tool Steel…

Mould Steel: Cold Work / Hot Work Mould Steel, Plastic Mould Steel…

Structural Steel: Carbon Structural Steel, Alloy Structural Steel…

Shape: Round, Square, Flat, Heavy Thickness Plate…

Stainless Steel | Bearing Steel | Spring Steel

 

ProductDimensionDelivery ConditionApplication
Category(mm)
Flat Steelthickness×width10~90×60~310Hot-rolling、annealing、pre-hardeningCold-worked die、hot-worked die、plastic die、non-magnetic die steel
8~90×300~610
6~13×100~300
Square Steellength of side□12-250Hot-rolling、annealing、pre-hardeningCold-worked die、hot-worked die、plastic die、non-magnetic die steel
Product CategorySteel GradeSimilar to other Foreign Steel GradeSpecification
USA, ASTMJapan, JISGermany, DIN
die steel9SiCr、8MnSi、Cr06、Cr2、9Cr2、W4CrW2Si、5CrW2Si、6CrW2Si、6CrMnSi2Mo1V、5Cr3MnSiMo1V、Cr12、Cr12Mo1V1、Cr12MoV、Cr5Mo1V、9Mn2V、CrWMn、9CrWMn、Cr4W2MoV、6Cr4W3Mo2VNi、6W6Mo5Cr4V、7CrSiMnMoV、5Cr5WMoVSi、5CrMnMo、5CrNiMo、3Cr2W8V、5Cr4Mo3SiMnVAl、3Cr3Mo3W2V、5Cr4W5Mo2V、8Cr3、CrMnSiMoV、4Cr3Mo3SiV、4Cr5MoSiV、4Cr5W2VSi、4Cr5MoSiV1、7Mn15Cr2Al3V2WMo、3Cr2Mo、3Cr2MnNiMo (etc.)D7、F1、S5、S7、     D3、D2、A1、O2、SKS3、SKS41、SKD1、SKD11、SKD12、SKS31、SKS3、SKT4、SKD5、SKD6、SKD611.2067、1.2080、GB1299
O1、A8、L6、H21、1.2379、1.2601、
H10、H11、H13、P20、4201.2363、1.2419、
1.2713、1.2581、
1.2343、1.2344、
1.2312、1.2738、
1.4021、1.4034
spring steel65Mn、55Si2Mn、60Si2MnA、60Si2CrA、60Si2CrVA、50CrVA (etc.)GB1222
carbon tool steelT7、T8、T9、T10、T12、T8Mn(etc.)GB1298
stainless steel1Cr13、2Cr13、4Cr13、1Cr12Mo、1Cr11MoV、2Cr12NiMo1W1V、0Cr17Ni4Cu4Nb (etc.)GB4230、
GB8732
alloy steel30CrMnSiA、15CrMo、42CrMo、12Cr1MoV、25Cr2MoV、38CrMoAl、40Cr (etc.)GB3077
high speed steelW6Mo5Cr4V、W18Cr4V (etc.)M2>GB9943

 

TOOL STEEL SIZE TOLERANCES
Tool Steel is stocked to tolerances per ASTM A681-08. Round bars are turned to plus tolerances to allow customers to finish to the nominal diameter. Flat bars are ground on the thickness to plus tolerances ranging from +.015 to +.090 depending on the thickness of the material.

Width tolerances on flat bars is +.125/.150 and the edge is saw cut. Length tolerance on all flats and rounds is +.125/.250. Tool Steel flats can also be saw cut on the thickness for sizes over 3", which will result in tolerances up to .250 over nominal size. Please ask your salesperson for detail regarding the tool steel flats you're interested in.

HIGH SPEED STEEL SIZE TOLERANCES
High Speed Steel is produced and stocked to tolerances per ASTM A600-92A (2010). High speed steel round bar can be bought on-size (+.004,-.000) or oversize (+.015,-.000). High speed flats can be bought ground oversize, saw cut, or hot rolled. Please ask your salesperson for detail regarding the high speed steel flat you're interested in.